An air-conditioning coil can freeze because its surface becomes cold enough for condensation to turn into ice. Low airflow and low refrigerant charge can both produce that condition, but they call for different tests. Adding refrigerant before locating a leak or checking the filter is guesswork dressed as repair.
Start with the indoor airflow path. A clogged filter, collapsed duct, blocked return or dirty coil can reduce heat transfer and lower the coil temperature. The blower may have a failing capacitor, an incorrect speed setting or a restriction in the supply system. Record filter condition, return size, blower behavior and static pressure if the technician has the equipment.
The outdoor unit also needs a clean condenser coil and adequate clearance. In winter, do not operate cooling equipment outside its permitted range. If the outdoor fan is not running, the diagnosis changes again. Electrical and refrigerant work should be left to a licensed technician; ice hides the evidence and the pressure readings may be misleading until the system has fully thawed.
Thawing should follow manufacturer guidance and protect the drain pan, cabinet and surrounding space. After thawing, confirm that the filter and ducts are clear, then observe the coil, airflow and operating pressures through a full cycle. If ice returns, document the conditions and continue the diagnostic sequence rather than repeatedly melting the same symptom.
A freeze event can be a maintenance warning or a sign of a refrigerant leak. The useful conclusion is a specific fault path, not a list of parts replaced. Ask the technician to explain the measurements that support the diagnosis. This keeps repair decisions tied to evidence and reduces the chance that the next hot day brings the same white block of ice back.