A fan can move air, but ventilation is a designed exchange between indoors and outdoors. The question is which pollutants and moisture are being controlled, how much fresh air is delivered and whether the rest of the building is compensating through uncontrolled leaks. A bath fan that depresses a tight house can pull air through a dusty attic or a garage.
Local exhaust is appropriate at kitchens and bathrooms, where pollutants and moisture are concentrated. Whole-house ventilation may be continuous or intermittent, depending on the climate and assembly. Heat-recovery and energy-recovery ventilators exchange energy between outgoing and incoming air, but they still need balanced ducts, filters and accessible maintenance.
Cooking is a major indoor-air source. A range hood should capture vapors near the source, exhaust outdoors and be selected for the cooking style and duct route. Downdraft or recirculating systems can be useful in some situations, but their capability is not the same. Combustion appliances need especially careful analysis because exhaust fans can change pressure in the room.
Humidity control belongs in the same discussion. A ventilation rate that works in a dry season can over-wet a house in a humid one. A dehumidifier may be needed in a basement independent of the central air system. An ERV can reduce moisture gain in humid climates, while an HRV may be preferred elsewhere, but the choice depends on the climate and building.
The final system should have clear controls, labeled filters and a commissioning record. Airflow should be measurable at the fan or within the duct, and the owner should know how to verify operation. Ventilation is working when the building has a deliberate supply of fresh air, a reliable exhaust path and no unintended pressure or moisture problem.