A water service line is the pipe that connects the public main to a building. If it contains lead, the first meter of plumbing can contribute to drinking-water exposure. The utility may have records, but records can be incomplete. A careful identification process, a utility inspection or an approved test can help determine whether the line is lead, galvanized steel or another material.

A section of cast-iron household drain pipe.

Do not scratch or disturb a suspected line. A licensed plumber or utility crew should confirm the material and explain replacement options. Partial replacement can be tricky because disturbing lead pipe may temporarily increase particle release. If work is planned, ask about flushing, filters and a safe interruption procedure. The utility and local health department are important sources of guidance.

For a known or suspected lead line, use cold water for drinking, cooking and preparing infant formula. Flushing can reduce water that has sat in the service line, but the duration depends on the plumbing layout. A certified filter designed for lead removal is a practical interim measure when used and maintained exactly as instructed. Boiling does not remove lead.

Testing can be useful, but sampling protocol matters. First-draw and flushed samples answer different questions. Follow the laboratory plan rather than a generic at-home procedure. If lead solder, brass fixtures or a service line are suspected, test at the appropriate taps and repeat after repairs or changes in water chemistry.

The durable solution is source replacement combined with corrosion control and responsible plumbing practice. The immediate solution is clear information, a safe temporary protocol and a filter that is certified for the job. Lead exposure is a public-health issue, so uncertain situations deserve a call to the utility or local health authority rather than a guess.