A gutter system has a narrow brief: collect roof runoff and direct it away from the building. Its capacity depends on the roof area draining to it, the intensity of local rainfall, the gutter profile and the number and size of downspouts. A long run with one small outlet can overflow even when the channel itself is clean.
Slope is part of the design. Gutters need enough fall to move water toward outlets without creating standing water, but excessive slope can look wrong and stress hangers. Fasteners should be spaced and anchored into sound fascia. Hidden rot at the fascia is a common reason a gutter appears to fail; replacing the hanger without repairing the substrate only postpones the next failure.
Downspout discharge needs a destination. Extensions can release water several feet from the foundation, while splash blocks, dry wells and rain barrels must be sized and maintained. Water should not be allowed to pond against the foundation or run back into a basement. In freezing climates, the route must also account for ice and blocked outlets.
Leaf screens reduce debris in the channel but do not remove the need for inspection. Fine mesh can collect pollen and roof grit; coarse guards can let small debris pass. A few strategically placed inspection points and accessible downspout cleanouts make maintenance practical. A ladder is not a plan unless the owner has a safe way to use it.
The performance test is easy to describe: roof water should reach the ground at a controlled location, and that location should slope away from the building. If gutters spill at the fascia, stain the siding or soak a basement wall, the priority is not a new decorative guard. It is to correct capacity, slope and discharge.